What are the production processes, procedure, steps, and whole processes of silicone products?

Dec 07, 2022 Legg igjen en beskjed

When it comes to silicone products, I believe many friends are familiar with it. In our daily life, we often have electronic product protective cases, mobile phone silicone protective cases, Bluetooth speaker protective cases, etc., as well as baby products such as silicone feeding bottles and pacifiers. It can be said that silicone products have been closely related to our lives. Can you understand the production process of silicone products? What about the production process? It is understood that there are currently two methods for the production of silicone products. One is a product that is solid-state molded with compound rubber, and the other is a product that is injection-molded with liquid silicone rubber.

_20220530142655

_20220606171646

It is necessary to understand that the silicone product material made by the first process is vulcanized with peroxide, which requires various processes such as rubber mixing, opening, trimming, weighing, molding, and tearing. Using this process to produce silicone products is mainly used for the application of low-end silicone products; in addition, the silicone products made by the second process are directly bought back two-component sealed barrels of silicone, and use liquid silicone rubber injection molding machine Direct production, after installing machinery, the flow of the entire material is carried out in a sealed state, without manual intervention, so it will not be polluted. The material used in this process is made of platinum as a vulcanizer, which is very environmentally friendly. It is widely used in high-end industries such as medical care and infant products.


In the production process of silicone products, the following types of molding are commonly used. What are the differences?


1. Extrusion molding process: Just like we squeeze toothpaste, the extrusion head is also the cross-sectional shape of the product, with a certain length. Under the action of force and temperature, the product that comes out of the head has been vulcanized and formed. The products formed by this process are generally strip-shaped products, and the product cross-sections can be various. For example, rectangular strips, circular silicon tubes, etc. the


2. Glue dropping process: The raw material of silicone rubber is in a liquid state, and the raw material is packed in a syringe. The raw material is dripped onto the mold by pneumatic and manual operation, and then heated and vulcanized to form. This process is a manual process, requiring a lot of labor. So the productivity is not high. It has a feature that a product can be dripped with multiple colors according to requirements. So this kind of craft is mostly for making handicrafts. For example, multi-color silicone bracelets, silicone mobile phone cases with various color patterns, etc. the


3. Solid-state hot pressing molding process: This process uses the temperature and pressure of the hydraulic press to vulcanize the product with the help of a mold. This process is relatively low in cost, high in output, and widely used. It is mostly used for monochrome silicone products. It can also be applied to two-color and double-hardness products or multi-color and multi-hardness products, but the structure of the product is not flexible and limited. It can also be applied to plastic and metal cladding, which is also inflexible in structure, and has temperature requirements for the packaged objects. Generally, the packaged objects are required to withstand 180 degrees Celsius without deformation.


4. Liquid injection molding process: The equipment required for this process includes a silicone injection machine and a press machine. Its raw material is water-thick, divided into two components, A and B. Its principle is: use the press machine to press the raw materials of A and B components into the barrel of the injection machine according to the ratio of 1:1, and then press it into the cavity of the hot mold through the nozzle to form. The molding temperature of this process is relatively low, 130 degrees is enough. It can be used for overmolding of plastics that are less resistant to high temperatures, which has advantages over solid-state thermocompression molding. It has high yields and is easy to automate. But the cost of raw materials is several times higher than that of solid silica gel raw materials.


We have already understood the production process of silicone products, so what are the production processes?


1. Material selection, select the appropriate silicone rubber material according to the product's use environment and quality requirements, such as the product's wear resistance, oil resistance, acid resistance, alkali resistance, high and low temperature resistance, tensile strength, etc., and use this to determine which material is more reasonable to choose.

 

2. Refining. In many cases, the raw materials we purchase are only raw rubber, which cannot be directly used in production, and secondary processing is required. We call it refining. Refining means adding accelerators to the raw rubber in a certain proportion. Toner and other auxiliary molding ingredients to meet production requirements.

 

3. Cutting. After refining, a whole piece of material is obtained. Next, according to the structure and size of the product, the whole piece of material needs to be cut into the final material with the same weight, shape and size as we need.

 

4. Forming. After the above work is completed, the most important step is forming. We need to put the material cut in the previous step into the silicone rubber mold, and perform hot pressing according to the pre-set process parameters to finally get what we need. Of course, there are also products that can be obtained by directly injecting the material into the mold cavity through the injection molding machine instead of hot pressing, which is similar to the principle of the syringe.

 

5. Processing/inspection. After molding, what we get is a whole piece of product. We need to separate the part of the product we need from the middle, then remove the product burrs, and inspect the appearance of the product. So far, a qualified silicone rubber product is also complete its entire process.

 

 Of course, not all silicone product production processes are as described above. The specific plan is determined according to the actual situation and the customer's quality requirements for the product! It cannot be generalized.


Sende bookingforespørsel

whatsapp

Telefon

E-post

Forespørsel